Drone

Description:

A compact FPV drone with integrated propeller guards, an ultra-wide field of view and 4K video recording. Suitable for dynamic, low-altitude and indoor camera movements, vehicle tracking and flights through confined spaces.

Details:

The DJI Avata 2 enables striking, high-speed camera movements that would be difficult or impossible to achieve with a conventional camera drone. Its integrated propeller guards allow use indoors, between buildings, in wooded areas or close to performers and objects.

The camera can record 4K video at up to 100 fps, while the 10-bit D-Log M profile provides room for colour grading. RockSteady and HorizonSteady stabilisation reduce vibration caused by flight, and external Gyroflow stabilisation is also supported.

The drone requires compatible DJI Goggles and a remote controller. It does not have comprehensive obstacle avoidance, so safe operation requires an experienced FPV pilot.

Technical specifications:

• Sensor: 1/1.3-inch CMOS, 12 megapixels
• Lens: 12 mm equivalent ultra-wide angle
• Field of view: 155°
• Aperture: f/2.8
• Maximum video resolution: 4K 100 fps
• 4:3 recording: 4K at up to 60 fps
• Video format: MP4, H.264 or H.265
• Maximum bitrate: 130 Mbps
• Colour profiles: Standard and 10-bit D-Log M
• Stabilisation: RockSteady 3.0+ and HorizonSteady
• External stabilisation: Gyroflow support
• Gimbal: single-axis mechanical tilt
• Internal storage: 46 GB
• Storage expansion: microSD card
• Video transmission: DJI O4
• Maximum CE transmission range: 10 km under ideal conditions
• Maximum flight time: approximately 23 minutes
• Maximum speed in the European Union: 19 m/s in Manual mode
• Position sensing: downward and rearward
• Comprehensive obstacle avoidance: none
• Integrated propeller guards
• Turtle Mode for flipping the drone upright after overturning
• Compatibility: DJI Goggles and DJI RC Motion or FPV Remote Controller systems
• Take-off weight: approximately 377 g
• European drone class: C1